Version 30.26 by Dani Alexander Berentzen on 2017/11/07 11:00
Show last authors
1 (% class="WordSection1" %)
2 (((
3 = Overview =
4
5 The H2H PayEx link enables authorization and capture of card transactions. Depending on the card, PayEx is either a PSP or the end host (card issuer). The third party host acts as a gateway between payment terminals and PayEx.
6
7
8 [[image:pos server.png]]
9
10
11
12
13 The third party host can be a single or dual host system.
14 PayEx has a fully redundant system, with an active/active configuration.
15 The third party host(s) connects to a load balancer at PayEx.
16
17
18 == Supported massage types ==
19
20
21 |=Message Type|=Reference
22 |1100/1110|[[AUTHORISATION REQUEST>>doc:AUTHORISATION REQUEST 1100/1110]]
23 |1200/1210|[[FINANCIAL TRANSACTION REQUEST>>doc:.FINANCIAL TRANSACTION REQUEST 1200/1210.WebHome]]
24 |1220/1221/1230|[[FINANCIAL TRANSACTION ADVICE>>doc:FINANCIAL TRANSACTION ADVICE 1220/1221/1230]]
25 |1420/1421/1430|[[REVERSAL ADVICE>>doc:REVERSAL ADVICE 1420/1421/1430]]
26 |1820/1830|[[NETWORK MANAGEMENT>>doc:.NETWORK MANAGEMENT 1820/1830.WebHome]]
27 |1520/1521/1530|RECONCILIATION REQUEST (**Currently not supported)**
28
29 * Message types included in the table above are supported unless otherwise specified. E-g reconciliation is not currently supported.
30 Use links to different message types for details on specific messages.
31 Only the Financial transaction advice (1220), Reversal Advice (1420) use repeat messages. Repeats are to be sent according to xxxxxxx rules
32 * Advice can be declined by PayEx for technical reasons. In this case the third party host need to retry the advice until manual intervention or the advice has been accepted. It’s expected that the third party implement a retry delay (to-be-defined). After 6 retry attempts have failed manual intervention by third party and PayEx support must be initiated.
33
34 == Message layout ==
35
36 This section covers message types and fields supported by PayEx
37
38
39 |=Presence|=Title|=Description
40 |C|Conditional|The data element’s presence depends on specific circumstances, witch are described either directly or by reference in the message content table.
41 |CE|Conditional echo|The response message must have the same data element if the data element was present in the original message
42 |M|Mandatory|Data element must be present in the specified message
43 |ME|Mandatory echo|The response message must have the same data element and value as sent in the original message request or advice message
44 |O|Optional|The data element may or may not be present in the message
45 )))
46
47 Optional fields may always be present in requests, even when not needed. In such case, they will be ignored. Requests received missing a mandatory field will get action code 904 - Format Error.
48
49 The third party host must ignore unknown fields included in the response messages.
50
51 When no usage notes are given in the field description, the field should be used as described in IFSF [1].
52
53 The “Format”-column can contain following info:
54
55 * LL: Variable length field, max 99 bytes as data. The field contains 2 bytes holding the length of the data. Example: 303101 a one byte field with LL = 3031 and the data is 01.
56 * LLL: Variable length field, max 999 bytes as data. The field contains 3 bytes holding the length of the data. Example: 30303101 a one byte field with LLL = 303031 and the data is 01.
57 * Date/time field formats, YYMMDDhhmmss (or variations), where:
58 ** YY : Last 2 digits of the year, 00 through 99
59 ** MM: Month, 01 through 12.
60 ** DD: Day, 01 through 31
61 ** hh: Hour, 00 through 23
62 ** mm: Minutes, 00 through 59
63 ** ss: Seconds, 00 through 59
64
65 The “Type”-column can contain:
66
67 * a : Alphabetic character [a..z,A..Z]
68 * n : Numeric BCD-digit. [0..9]
69 * ans: alphabetic, numeric and special characters
70 * an : alphabetic and numeric.
71 * s : Special characters.
72 * b : Binary
73 * p: pad character, space
74 * x: “C” for credit, “D” for debit and shall always be associated with a numerical amount data element.
75
76 The “Size”-column can contain:
77
78 * Variable length fields have a size that looks like “..nn”, where nn is the maximum number of characters or bytes.
79 * A fixed length field has “n” as size content, with n the number of characters or bytes.
80
81 All fixed length “n” data elements are assumed to be right justified with leading zeroes. All other fixed length data elements are left justified with trailing spaces. In all “b” data elements, blocks of 8 bits are assumed to be left justified with trailing zeroes.
82
83
84 == Message protocol ==
85
86 All messages are transferred using TCP/IP sockets.
87
88 The message will be encapsulated in a transmission frame as follows:
89
90 * The first 4 digits contain the length of the message in ASCII (decimal value, most significant digit first). The length field includes all bytes from the first byte of the message ID up to the last byte of the last field.
91 * This 4-digit length field is immediately followed by the message ID, also in ASCII (decimal value, most significant digit first).
92 * An 8 byte message bitmap, which is a binary field (not ASCII encoded).
93 * Message fields, which could be ASCII or binary encoded. The fields with format ‘n, ns, an, ans, anp or x’ are ASCII encoded, while the fields with format ‘b’ are binary encoded. The following conventions shall be applied to all data elements:
94 ** All fixed length numeric data element values shall be right justified with leading zeroes.
95 ** All fixed length data elements with alphabetic or special characters shall be left justified with trailing blanks.
96 ** All fixed length binary data elements shall be right justified with leading zeroes.
97 ** The position of a character or a bit in a data element shall be counted from the left beginning with one (1).(See also section 5.1 Attribute specification in [01])
98 ** No trailer is included.
99
100 Example: An imaginary message which consists only of a message ID “0300” and an empty bitmap (all zeros) will be transmitted as follows:
101
102
103 |=Length|=(((
104 Message ID
105 )))|=Bitmap
106 |=0x30 0x30 0x31 0x32|=0x30 0x33 0x30 0x30|=0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
107
108 Example: An 1820 message, without MAC, will be transmitted as follows: Message bytes (hex):
109 303035303138323002300101000000003039313031353238343133383239313030393039313031353238343138333130353130303331
110
111
112 |=Field|=Format|=Encoding|=Data|=Parsed
113 |Message Length|n|ASCII|30303530|0050
114 |Message ID|n|ASCII|31383230|1820
115 |Bitmap|b|Binary|0230010100000000|
116 |7 - Date/Time|n|ASCII|30393130313532383431|0910152841
117 |11 - STAN|n|ASCII|333832393130|382910
118 |12 - Date/Time|n|ASCII|303930393130313532383431|090910152841
119 |24 - Function code|n|ASCII|383331|831
120 |33 - Forwarding institution identification code|n|ASCII|(((
121 30323135
122 )))|15
123
124 The PayEx response timeout is set to 35 seconds. If after 35+1 seconds, no response has been received, the third party host needs to take the appropriate action based on the message type. (E.g. send a reversal)
125
126 The third party host has the possibility to perform offline stand-in, thought this needs to be agreed with the individual card issuers. Otherwise the station might not be reimbursed.
127
128 == ==
129
130 == PIN Validation ==
131
132 PayEx perform online PIN validation on payment cards where PayEx is the acquirer, on all other cartds PIN is validated by the third party acuirer. PayEx will not interpret P-22 Point-Of-Service code to determine if it needs to validate PIN or not on PayEx fuel cards, but 3rd patry aquirers might so it's good practice to use P-22 correctly.
133
134 Fields required for PIN validation are:
135
136 * P-48-14 – PIN encryption Methodology
137 * P-52 – PIN data
138 * P-53 – Security related information
139
140 (% class="wikigeneratedid" id="H-1" %)
141 See [[security documentation>>doc:.PayEx IFSF H2H Security specification.WebHome]] for details.
142
143 == Security documentation ==
144
145 Here you can find details regarding the security elements of this H2H integration.
146
147 __[[SECURITY SPECIFICATION>>doc:.PayEx IFSF H2H Security specification.WebHome]]__
148
149 == Response codes ==
150
151 Here you can find the response codes which may be returned from PayEx.
152
153 [[RESPONSE CODES>>doc:.Response codes.WebHome]]
154
155 (% class="wikigeneratedid" %)
156 == ==
157
158 (% class="wikigeneratedid" %)
159 == Message field overview ==
160
161 **P-3 PROCESSING CODE**
162
163 Code used to describe the effect of a transaction on the customer account and the accounts affected. Currently fixed 00000000 : Goods and services
164
165
166 **P-4 AMOUNT, TRANSACTION**
167
168 The amount is a numeric value, expressed without a decimal separator. Where a minor unit of currency applies, the relevant minor unit data element indicates the number of decimal places in the relevant amount. Example : 1 kr = 100
169
170
171 **P-7 DATE AND TIME, TRANSMISSION**
172
173 Date and time of message transmission from the third party host.
174
175
176 **P-11 SYSTEM TRACE AUDIT NUMBER**
177
178 Number assigned by the third party host to assist in identifying a transaction uniquely. Range 000001 till 999999. Every message must have a new STAN, repeats use the same STAN as the original message.
179
180
181 **P-12 DATE AND TIME, LOCAL TRANSACTION**
182
183 Date and time of the transaction when performed on the POS.
184
185
186 **P-22 POINT OF SERVICE DATA CODE**
187
188 A series of codes intended to identify terminal capability, terminal environment and presentation security data.
189
190
191 **P-24 FUNCTION CODE**
192
193 |=Function code|=Description
194 |101|Original authorization, amount estimated used in 1100
195 |200|Original financial request/advice Used in 1200/1220/1221
196 |201|Previously approved authorisation, amount the same Used in 1220/1221
197 |202|Previously approved authorisation, amount differs Used in 1220/1221
198 |400|Full reversal Used in 1420/1421
199 |831|Echo test Used in 1820
200
201 **P-25 MESSAGE REASON CODE**
202
203 |=reason code |=Description
204 |1003|Card issuer unavailable
205 |1004|Terminal processed
206 |1005|ICC processed
207 |1508|On-line forced by terminal
208 |4000|Customer cancellation
209 |4020|Invalid response, no action taken
210 |4021|Timeout waiting for response
211 |4351|Cancellation - unmatched signature
212
213 **P-30 ORIGINAL AMOUNT**
214
215 The original amount data element is a constructed element of two parts with a total of 24 positions:
216 a) Original amount transaction, n 12;
217 b) Original amount reconciliation, n 12.
218 Absence of data shall be indicated by zeroes. These parts shall be used when attempting to perform a partial approval and shall contain the original amounts.
219
220
221 **P-33 FORWARDING INSTITUTION IDENTIFICATION CODE**
222
223 10 digit code identifying the 3rd patry host. Each 3rd party integrated with PayEx will be assigned a unique code that they are to use in all messages where P-33 is specified.
224
225
226 **P-38 APPROVAL CODE**
227
228 Code assigned by the authorising institution indicating approval.
229
230
231 **P-39 ACTION CODE**
232
233 See action code page for codes that can be returned by PayEx.
234
235
236 **P-41 Card acceptor terminal identification**
237 Needs to be unique per POS terminal at the merchant site. For Indoor terminals use the range 1-99 and for outdoor terminals 100-199. PayEx needs to be informed of how many terminals that are installed at the merchant site.
238
239
240 **P-42 Card acceptor identification code**
241
242 8 digit unique ID provided by PayEx for each merchant.
243
244
245 **P-43 Card acceptor name/location**
246
247 The name and location of the card acceptor.
248
249
250 **P-48 MESSAGE CONTROL DATA ELEMENTS**
251 Used for the control of messages between the POS and the FEP. These are present in field 48 as a variable content data element. It uses a standard bit map to identify the specific data elements present in field 48. The format is LLLVAR with a maximum length of 999. The 8 byte bit map is the first item (element 48-0) in the data element.
252
253
254 **P-48-4 BATCH/SEQUENCE NUMBER**
255
256 This field identifies the transactions associated with a particular settlement period. This number starts at one and increments with each Reconciliation.
257
258
259 **P-48-8 CUSTOMER DATA**
260
261 The customer data is any data entered by the customer or cashier as required by the authorizer to complete the transaction. Transactions requiring customer data may be related to fleet fuelling, cheque authorizations or any other type of retail store management functions. Up to sixteen separate entries are supported. Each entry consists of two elements, the type of customer data entered and the variable length value of the entered data. Successive entries are separated by a back-slash (\). (Note: the LVAR method is not used for these entries.) The entire data element has a maximum length of 250 bytes and is parsed as an LLLVAR field.
262
263 |=Element|=Name|=Attribute|=Description
264 |48-8-1|Number of customer data fields|n2|Count of customer data entries to follow.Note: this value must be from 1 to 16.
265 |48-8-2|Type of customer data|an 1|Identifies the type of customer data entered. (see P48-8-2)
266 |48-8-3|Value of customer data|ans...99|Data entered by customer orcashier.
267
268 **P-48-8-2 TYPE OF CUSTOMER DATA**
269
270 1 - Vehicle ID
271 3 - Driver ID
272 4 - Mileage
273
274
275 **P-48-9 TRACK II OF VEHICLE CARD**
276
277 Used to specify the second card in a transaction if a special card is needed in addition to the payment card to link a transaction to a loyalty account.
278
279
280 **P-48-14 PIN ENCRYPTION METHODOLOGY**
281
282 See [[security documentation>>doc:.PayEx IFSF H2H Security specification.WebHome]] section for details.
283
284
285 **P-48-37 VEHICLE IDENTIFICATION ENTRY MODE**
286 Only present when a vehicle number is available (P48-8). Defines how the vehicle number was entered:
287
288 0 - Manual entry
289 1- On the Card
290 2 - Automatic License Plate Recognition
291
292
293 **P-48-38 PUMP LINKED INDICATOR**
294
295 Indicating whether the fuel pump reading is is linked to the payment terminal:
296 0 – Unspecified
297 1 – Pump-linked
298 2 – Pump not linked
299
300
301 **P-48-39 DELIVERY NOTE NUMBER**
302 Number allocated by the terminal given to the customer as printed on the ticket.
303
304
305 **P-49 CURRENCY CODE , TRANSACTION**
306 All transactions are in local currency, as defined during system installation. Actual value is as defined by ISO 4217.
307
308
309 **P-52 PIN DATA**
310
311 See[[ security documentation>>doc:.PayEx IFSF H2H Security specification.WebHome]] section for details.
312
313
314 **P-53 SECURITY RELATED CONTROL INFORMATION**
315
316 See[[ security documentation>>doc:.PayEx IFSF H2H Security specification.WebHome]] section for details.
317
318
319 **P-56 ORIGINAL DATA ELEMENTS**
320
321 Data elements of original transaction which contains the original “message identifier”, original “STAN” and original “date and time – local transaction”. This must be present if the message is preceded by an 1100 Authorisation Request, it can be omitted if the message is as a result of a store and forward transaction.
322 In Payment advice : Link to previous Authorization dialog
323 In reversal advice : Link to previous Authorization request or previous Payment request being reversed.
324
325
326 **P-62 PRODUCT SETS AND MESSAGE DATA**
327
328 This field contains allowed product sets and message data.
329
330 |=Number|=Name|=Format|=Attribute|=Description
331 |62| |n|3|LLLVAR length field. Sets the length of P-62 data
332 |62-1|Allowed products|ans|...99|LLVAR field, contains the products that are allowed
333 |62-2|Device text|n|1|For what device 62-3 is to be sent to
334 |62-3|Massage text|ans|...999|LLLVAR field. Display text
335
336 All subfields must be present when bit 62 is set. Field 62 shall not be sent if none of the three subfields need to be sent. If one of the subfields needs to be sent, all three subfields shall be sent.
337
338
339 **P-63 PRODUCT DATA**
340
341 This data element provides the detailed information on the products purchased or selected by the customer. The first two fields (63-1, 63-2) appear once per transaction. The next seven fields can be repeated up to 18 times.
342
343 Each product is represented by seven fields: Product Code, Unit of Measure, Quantity, Unit Price, Amount, Tax code and Additional product code. The variable length fields and the succeeding entry are separated by a back-slash (\).
344 Unit price and amount may be negative or positive, but the sum of the amounts in the product data must equal the transaction amount.
345 The values of Quantity and Unit price may have a value that includes both integer and fractional values. The format of these fields consists of a single digit, which specifies the number of fractional digits following the integer, followed by the numeric value.
346 The value must be numeric. The number of fractional digits has a maximum of 4. The Amount field may have fractional digits. The number of fractional digits is specified by the currency code.
347
348 The list of sales items can contain a mixture of normal sales items and refund items. These are included in the online Host message as follows:
349
350
351 |=Number|=Format|=Field|=Description
352 |63|n 3|Product data|LLLVAR length field. Sets the length of P-63 data
353 |63-1|a 1|Service level|(((
354 S - Self-serve
355 F - Full serve
356 Space - Information not available
357 )))
358 |63-2|n 2|Number of products|Count of products (sale item) reported for this transaction.
359
360 Each Sales item consists of the following components:
361
362
363 |=Number|=Format|=Field|=Description
364 |63-3|n 3 |Product code|3-digit product code that defines the type of product sold
365 |63-4|a 1 |Unit of measure|Indicates the meaning of the Quantity field. ‘U’ Sold per Unit
366 ‘O’ Unit of Measurement undefined ‘L’ Sold per Litre.
367 |63-5|n 9|Quantity|Number of product units
368 | | |Separator|‘\’ To separate Quantity from Unit-Price
369 |63-6|sn 9|Unit price|Starts with a Minus sign when Unit price is negative. First digit is exponent. Typically 3 for fuels, and 2 for shop articles. Remaining digits are actual unit price
370 | | |Separator|‘\’ To separate Unit price from Amount
371 |63-7|sn 12|Amount|Starts with a minus sign in case Item amount is negative. 2 decimals are always implied.
372 | | |Separator|‘\’ To separate the Amount from the Vat Code
373 |63-8|an 1|Tax code|1 digit VAT code
374 |63-9|n 14|Additional Product code|Up to 14 digits article number as known in the POS
375 | | |Terminator |‘\’ To mark the end of this sales item
376
377 **P-64 MAC**
378
379 See [[security documentation>>doc:.PayEx IFSF H2H Security specification.WebHome]] for details.
380
381
382 **P-127 Encrypted data**
383
384 This field contains the encrypted track2 data. See [[security documentation>>doc:.PayEx IFSF H2H Security specification.WebHome]] section for details on how to generate this field.
385
386
387 **P-128 MAC**
388
389 **This field is used for MAC if P-127 is present**. See [[security documentation>>doc:.PayEx IFSF H2H Security specification.WebHome]] for details.
390
391